Denbergloss colored polyurethane paint 1-5-ליטר
Denbergloss colored polyurethane paint Polyurethane high quality top paint uv durable and scratch resist POLYURETHANE TWO COMPONENT COAT ABRASION RESISTANCE * FAST DRYING TOP COAT HIGH QUALITY PAINT, UV DURABILITY Denbergloss colored polyurethane paint www.denber.net Properties: Fast drying, ready for recoating after 4-6 Tough, scratch Good adhesion to metal, concrete, Can be applied in some layers for thick Suitable for walking and car parking Washable and repulsive dust & UV protection coat Scratch preventing coat. Applications: Metal, wood & concrete top Wooden floors, parquets. Wooden furniture’s. Exterior walls. Metal buildings and construction top coat. Car parking area floor coating. Polyurethane high quality top paint uv durable and scratch resist Technical Data: Theoretical spreading rate: 1 liter per 12-15 m 2 Theoretical coverage: 6-7 m2/liter for 150 thickness layer. Recommended dry thickness: 75 Recommended number of layers: 2 Mixing rate a:b by volume: 2:1 Density: 9-1.35 gm/cm 3 (DIN 51575) Hardness: >3 Dg (Erichsen) Elasticity: 1 mm (Sheen) Viscosity: 2-4 sec (Haake) Traction resistance: 2 N/mm 2 (DIN 53455) Adherence to steel: 215 kg/cm 2 Impact resistance: 8 Dg/mm 2 Pot life: 4-6 hours at 20°c. Contains: Special polyurethane. ו Isocyanate hardeners. ו Pigments. ו Fillers. ו Additives. ו Colors: Clear, All colors according cat. RAL or any other. ו Gloss: Glossy, Silky, matte. ו Touch-drying time : 60 minutes. ו Repainting Gap Time: 4-6 hours. ו Curing time: 24 hours. ו Recommended Application Methods: Spray, brush,roller. ו Polyurethane high quality top paint uv durable and scratch resist Dilution: Spray gun- 25-35%25 thinner D-11 pressure 4-5. ו Brush & airless- 5-10%25 D-11, input pressure 5-6 Nozzle - 0.018" output pressure 120-150 atm. ו Surface Preparation: Non-ferrous metals - cleaned-dry, free of When exposed to condensation - surface must be swept. ו Suitable primer needed in some surfaces. ו Steel - sand blast to Sa-2.5, Swedish standard or sspc s-p 10 USA standard or DIN - 55928 4 German standard. ו Concrete - sand blast till the concrete is perfectly clean & the apertures / holes are Also recommended extra cleaning with diluted acid and water high pressure cleaning. (painting allowed 30 days after casting concrete) ו Wood - surface must be clean and First coat of isolation will function as primer. After sanding the dry primer it is ready for recoating. ו Instruction for use: Surface preparation as recommanded. ו Open carefully parts a & b and stir separately. ו Pour needed quantity ratio base to hardener 2:1. Blend well for homogenous mixture and add thinner D-11 as recommanded. ו Blend again and spray first coat, after 4-6 hours minimum sand a little and spray second layer and For full data sheet enter the old site - לאתר הישן לקבלת מפרט מוצר מלא: http://www.denber-paints.co.il